ABOUT INDEXING BOARD ARCHIVES AUTHOR GUIDELINES SUBMIT PAPER AUTHOR'S PAGE NEWS, EVENTS CONTACT
REVISTA DE CHIMIE
Cite as: Rev. Chim.
https://doi.org/10.37358/Rev.Chim.1949

OSIM Nr. R102355
ISSN Online 2668-8212
ISSN Print: 1582-9049
ISSN-L: 1582-9049

REVISTA DE CHIMIE Latest Issue

LATEST ISSUE >>>

   Volume 76, 2025
   Volume 75, 2024
   Volume 74, 2023
   Volume 73, 2022
   Volume 72, 2021
   Volume 71, 2020
   Volume 70, 2019
   Volume 69, 2018
   Volume 68, 2017
   Volume 67, 2016
   Volume 66, 2015
   Volume 65, 2014
   Volume 64, 2013
   Volume 63, 2012
   Volume 62, 2011
   Volume 61, 2010
   Volume 60, 2009
   Volume 59, 2008
   Volume 58, 2007
 
<<<< back

Revista de Chimie (Rev. Chim.), Year 2016, Volume 67, Issue 6,





Alexandru Ghiban, Brandusa Ghiban, Ildiko Peter, Mario Rosso, Ioan Dan, TUDOR VIOREL TIGANESCU
Structural Behaviour of CoCrMoTi(Zr) Alloys for Dental Applications

Abstract:

Currently, the prosthesis, both removable and fixed, are usually realized in Co-Cr-Mo alloys, which possess good corrosion resistance owing to the appropriate microstructure, but presents low machinability. Occasionally also allergic responses to the constituents of base metal alloys are observed. Most adverse tissue reactions attributed to the wearing of a base metal removable prosthesis, however, are manifestations of improper design or poor fit. Being the major component, cobalt imparts to the alloy its intrinsic corrosion resistance. Ti is one of the best biocompatible metals and is widely used as implant. In addition, the total weight of the prosthesis can be modified. The purpose of this paper is to develop new dental materials with superior mechanical performance and corrosion resistance as well as higher biocompatibility. The attention was focused on the possibility to obtain a new class of cobalt based alloy by Ti addition. Different composition of CoCrMo base system were obtained by RAV technology, alloying with 2- 5%wt. Ti. Different investigations were carried out for the microstructural identification of the constituents either by energy-dispersive X-ray spectroscopy, hardness values determination and mechanical characteristic behaviour. Finally a correlation between structure-mechanical properties due to scanning electronic microscopy was made. Keywords: cobalt alloy, titanium alloying, mechanical behaviour, removable partial denture

Issue: 2016, Volume 67, Issue 6
Pages:
download pdf   Download Pdf Article
Creative Commons License
This article is published under the Creative Commons Attribution 4.0 International License
 
<<<< back
 
PUBLISHING SECTION
Author Guidelines
 * Paper Drafting
 * Paper Template
 * Ethical Statement
 * Paper Submission
Ghidul Autorului (ro)
Submit Paper
Author's Page
Publishing Ethics
Peer Review Process
Open Access & Archiving Policy
 Search Authors
 LATEST NEWS
REvista de Chimie NUMAR OMAGIAL PETRU PONI.. detalii
REvista de Chimie Revista de Chimie - 70 de ani de aparitie neintrerupta.. detalii
dictionar English-Romanian Dictionary for Mechanical Engineering
(download pdf)
  News, Events
Crossref Member Badge
 DOI  logo
 Gold Open Access | Source=http://www.plos.org/  | Author=art designer at PLoS
Creative Commons License
 Conferences of Contemporary
 Chemistry
 Biblioteca Chimiei
 Materiale Plastice