ABOUT INDEXING BOARD ARCHIVES AUTHOR GUIDELINES SUBMIT PAPER AUTHOR'S PAGE NEWS, EVENTS CONTACT
REVISTA DE CHIMIE
Cite as: Rev. Chim.
https://doi.org/10.37358/Rev.Chim.1949

OSIM Nr. R102355
ISSN Online 2668-8212
ISSN Print: 1582-9049
ISSN-L: 1582-9049

REVISTA DE CHIMIE Latest Issue

LATEST ISSUE >>>

   Volume 76, 2025
   Volume 75, 2024
   Volume 74, 2023
   Volume 73, 2022
   Volume 72, 2021
   Volume 71, 2020
   Volume 70, 2019
   Volume 69, 2018
   Volume 68, 2017
   Volume 67, 2016
   Volume 66, 2015
   Volume 65, 2014
   Volume 64, 2013
   Volume 63, 2012
   Volume 62, 2011
   Volume 61, 2010
   Volume 60, 2009
   Volume 59, 2008
   Volume 58, 2007
 
<<<< back

Revista de Chimie (Rev. Chim.), Year 2011, Volume 62, Issue 5,





Mona Ionas, Marioara Moldovan, Marcela Trif, Codruta Sarosi, Camelia Alb, Tiberiu Ionas, George Liviu Popescu
Qualitative Evaluation by Means of SEM on the Qualities of the Hybrid Layer Formed by an Experimental Self Etching Adhesive

Abstract:

The presence of the hybrid layer proves the existence of a micro mechanical bonding between dentine and resin. The aim of this study was to observe the aspects of an experimental adhesive at SEM, compared to two commercial adhesives. 30 molars extracted for orthodontic reasons were used as basis for preparing 60 cavities under a specific method. The adhesive systems under study were applied light-cured and the cavities were filled with composite material. The teeth were sectioned and the resulted surfaces were examined at SEM. The presence of the hybrid layer is well noticeable at all three adhesive systems studied but its characteristics differ from one material to the other. The chemical composition of the adhesives is reflected in the structural modifications, which are probably basis for the adhesion. The clinical significance of the morphological evidence is still unknown. According to the SEM analysis one can see that there is no standard hybridisation for the adhesive systems. The experimental adhesive system evaluated under SEM showed potential to form a hybrid layer and an adhesive layer with morphological aspects comparable with the commercial ones taken into study. Keywords: adhesive system, hybrid layer, SEM

Issue: 2011, Volume 62, Issue 5
Pages:
download pdf   Download Pdf Article
Creative Commons License
This article is published under the Creative Commons Attribution 4.0 International License
 
<<<< back
 
PUBLISHING SECTION
Author Guidelines
 * Paper Drafting
 * Paper Template
 * Ethical Statement
 * Paper Submission
Ghidul Autorului (ro)
Submit Paper
Author's Page
Publishing Ethics
Peer Review Process
Open Access & Archiving Policy
 Search Authors
 LATEST NEWS
REvista de Chimie NUMAR OMAGIAL PETRU PONI.. detalii
REvista de Chimie Revista de Chimie - 70 de ani de aparitie neintrerupta.. detalii
dictionar English-Romanian Dictionary for Mechanical Engineering
(download pdf)
  News, Events
Crossref Member Badge
 DOI  logo
 Gold Open Access | Source=http://www.plos.org/  | Author=art designer at PLoS
Creative Commons License
 Conferences of Contemporary
 Chemistry
 Biblioteca Chimiei
 Materiale Plastice