The Influence of the Manufacturing Method on the Structure and Magnetic Properties of Rapid Cooled Iron Based Alloys

Nabialek, Marcin; Jez, Kinga

Marcin Nabialek, Kinga Jez

The Influence of the Manufacturing Method on the Structure and Magnetic Properties of Rapid Cooled Iron Based Alloys

Abstract:

The studies include the production of an amorphous alloy with the chemical composition Fe62Co9Y8W1B20 by two methods: injection and suction casting while maintaining similar production parameters (such as: chamber pressure, protective gas) and comparison of their structure and magnetic properties. The alloy was examined for structure by X-ray diffraction. The magnetic properties were determined on the basis of the VSM and the Faraday magnetic balance measurements. Solid amorphous iron-based materials are characterized by good magnetic properties. The influence of the method of production on these properties turns out to be significant, especially in the case of coercive field. The obtained results lead to further research on massive iron-based amorphous materials. Future research will address the effect of changes in the chemical composition of the alloy on magnetic properties and the continuation of studies on the impact of the manufacturing method on the structure and properties of alloys. The obtained alloy is characterized by good soft magnetic properties. It is possible to use it in electronics and electrotechnics, especially in devices where easy remagnetization of the material at specific frequencies is required.

Keywords:
amorphous materials; magnetic properties; suction casting; injection casting

Issue: 2018, Volume 69, Issue 6

Pages: 1593-1597

Publication date: 2018/7/15

https://doi.org/10.37358/RC.18.6.6376

Download Pdf Article

This article is published under the Creative Commons Attribution 4.0 International License

Citation Styles

Cite this article as:
NABIALEK, M., JEZ, K., The Influence of the Manufacturing Method on the Structure and Magnetic Properties of Rapid Cooled Iron Based Alloys, Rev. Chim., 69(6), 2018, 1593-1597.

Vancouver
Nabialek M, Jez K. The Influence of the Manufacturing Method on the Structure and Magnetic Properties of Rapid Cooled Iron Based Alloys. Rev. Chim.[internet]. 2018 Jun;69(6):1593-1597. Available from: https://doi.org/10.37358/RC.18.6.6376

APA 6th edition
Nabialek, M., Jez, K. (2018). The Influence of the Manufacturing Method on the Structure and Magnetic Properties of Rapid Cooled Iron Based Alloys. Revista de Chimie, 69(6), 1593-1597. https://doi.org/10.37358/RC.18.6.6376

Harvard
Nabialek, M., Jez, K. (2018). 'The Influence of the Manufacturing Method on the Structure and Magnetic Properties of Rapid Cooled Iron Based Alloys', Revista de Chimie, 69(6), pp. 1593-1597. https://doi.org/10.37358/RC.18.6.6376

IEEE
M. Nabialek, K. Jez, "The Influence of the Manufacturing Method on the Structure and Magnetic Properties of Rapid Cooled Iron Based Alloys". Revista de Chimie, vol. 69, no. 6, pp. 1593-1597, 2018. [online]. https://doi.org/10.37358/RC.18.6.6376

Text
Marcin Nabialek, Kinga Jez,
The Influence of the Manufacturing Method on the Structure and Magnetic Properties of Rapid Cooled Iron Based Alloys,
Revista de Chimie,
Volume 69, Issue 6,
2018,
Pages 1593-1597,
ISSN 2668-8212,
https://doi.org/10.37358/RC.18.6.6376.
(https://revistadechimie.ro/Articles.asp?ID=6376)
Keywords: amorphous materials; magnetic properties; suction casting; injection casting

RIS
TY - JOUR
T1 - The Influence of the Manufacturing Method on the Structure and Magnetic Properties of Rapid Cooled Iron Based Alloys
A1 - Nabialek, Marcin
A2 - Jez, Kinga
JF - Revista de Chimie
JO - Rev. Chim.
PB - Revista de Chimie SRL
SN - 2668-8212
Y1 - 2018
VL - 69
IS - 6
SP - 1593
EP - 1597
UR - https://doi.org/10.37358/RC.18.6.6376
KW - amorphous materials
KW - magnetic properties
KW - suction casting
KW - injection casting
ER -

BibTex
@article{RevCh2018P1593,
author = {Nabialek Marcin and Jez Kinga},
title = {The Influence of the Manufacturing Method on the Structure and Magnetic Properties of Rapid Cooled Iron Based Alloys},
journal = {Revista de Chimie},
volume = {69},
number = {6},
pages = {1593-1597},
year = {2018},
issn = {2668-8212},
doi = {https://doi.org/10.37358/RC.18.6.6376},
url = {https://revistadechimie.ro/Articles.asp?ID=6376}
}

<<<< back

PUBLISHING SECTION

Author Guidelines

* Paper Drafting

* Paper Template

* Ethical Statement

* Paper Submission

Ghidul Autorului (ro)

Open Access & Archiving Policy

Search Authors

LATEST NEWS
	NUMAR OMAGIAL PETRU PONI.. detalii
	Revista de Chimie - 70 de ani de aparitie neintrerupta.. detalii
	English-Romanian Dictionary for Mechanical Engineering (download pdf)